Metal Anti-static Surface Clamp Joint Pipe Fitting For Lamp Support
|Metal anti-static surface clamp joint|
|Combination:||1 (H10) + 1 (H11) + 1 (M6*12)|
CRS Cold Rolled Steel
Surface treatment :
The HJ-13D is a metal anti-static connector that allows you to
connect a pipe with a surface. This connector is a prime choice if
you need to secure the surface solidly onto your Flexpipe
structure. If you want to create multiple anchor and support
points, this connector is the best solution in the Flexpipe system.
Unlike other clamping solutions in the system, this one will create
the most uniform look of all.
This joint eliminates the need to use EMT-1 and the AO-SHIM that
goes with it. This is possible because the Connector itself acts as
a shim. This solution creates a stronger bond between the pipe and
the surface. To assemble an HJ-13D, you need to group an H-10D and
an H-11D with one M6-12 bolt and one M6 nut.
The HJ-11D is the only joint in the Flexpipe system that doesn’t
use a standard connector bolt. Make sure you have selected the
right bolt when purchasing the parts necessary to assemble this
metal joint. The right Bolt for this joint is the M6-12, which
requires an M6.
one HJ-13D is combine with 1 pcs H-10D and 1 pcs of H-11 and 1 set
It is used for the strong connection between the composite pipe and
Chroming Meta Joints with Black anti-static PE pipe can assemble into ESD workbench or pipe rack
Metal joints are available as H (28mm) components or HJ (28mm)
H-components are joined together with common sized nuts and bolts
to form HJ joint sets.
All Metal joint sets are designed to hold the nut so only a simple
hex wrench is required for assembly or disassembly.
Chorming Metal joints are available for use with ESD rated Creform
pipe for structures in anti-static applications.
HOW TO INSTAL
1- Make sure you have the following parts:
1 28mm pipes of your choice
1 spanner 5mm tip
2-Take a connector H-10D and a connector H-11D and group them
around the PE1 pipe.
3-Take a M6-12 bolt and a M6 nut and insert them into the
corresponding openings. Make sure to put the bolt on the more
4- Tighten completely the M6-12bolt and M6 nut together until the
HJ-13D attached firmly to the PE1 pipe. A force of 9.8 Nm is
recommended for this step.
5- Fix the HJ-13D on the surface of your choice with one
appropriate screw for the select surface.
1. The flexible pipe is composed of high-quality steel tube with
high quality surface treatment.
2. The outer surface is composed of special plastic layer and inner
3. The product has the advantages of beautiful appearance,
wear-resisting, bright luster and pollution-free.
4. It is an ideal substitute for stainless steel products.
5. Surface special treatment without acute Angle, completely avoid
causing the human body, accessories and accessories, and other
items between the stabbing
1. Flexible and creative: simple structure, and your creativity can
3. Flexibility: modular structure, easy to restructure, make you
always have fresh feeling.
4. Safety: flexible pipe plastic surface to reduce the risk of
injury to workers in the workplace
5. Environmental protection: pollution-free production, the
components are completely recyclable, and eliminate waste, which is
completely in line with the international environmental protection
6. Body mechanics: a single M6 hexagon wrench can complete the
installation process.The concept of multi-purpose is used to give
full play to economic benefits.
Holds extensive supply of containers for feeding production area
with ample return lanes for holding emptied containers.
Angled Flow Rack
Lanes slope lengthwise allowing containers to flow from load to
picking end while second lane tilts containers for easy picking and
Supermarket Flow Racks
Wth serveral levels are connected with brackets to maintain spacing
and alignment while high-level density provides efficient order
Pipe & Joint System
Provides rigidity and strength for industrial applications without
the need for cross bracing while conveying either boxes or plastic
ESD Cart and Assembly Station
It is designed for handling electronic processors, chips, memory
boards and CPUs during assembly and transport.
Mobile Workstation and Ergonomic Flow Rack
This stores and presents parts and components to technicians at the
It is with an open deck design is easy to load and unload long
items and side rails prevent roll off while caster design provides
It is ideal for handling parts where high temperature processing is
involved, or for curing and drying operations after parts coating
Shenzhen Jingji Technology Co., Ltd.(TOP-KING HK LIMITED ) Is a
professional manufactuer for design, production and sale of
industrial storage equipment, flexible production equipment,
automation equipment and other kinds of instruments and gauges.
beside, the company distributes anti-static peripherals.
We provide a comprehensive logistics plan in order to avoid waste
of resources in course of purchase and supply chain by
manufactures. It is our ultimate goal to provide all customers with
full service, to meet exact demands of customers. To improve
product quality, and to enhance customer satisfaction storage annd
logistics as in automation industy.We are the Direct Material
Manufacturer and supplier of pipe and joint system, which is
ergonomic and dynamic.
Looking for a particular part? Tell us which one and for what
As a lean manufacturer ourselves, we try to limit our parts
quantity to the essential. We have realized that a supply of 150
different parts is enough to assemble almost any structure. We keep
in stock only what you need! We also suggest a list of approved
vendors to help you with special requests.
If you don’t find what you are looking for, contact us to place a
special order or to find a workaround.
Our mission is to enable individuals and companies to increase
productivity and add value to their processes. We make this
possible by offering the most affordable modular system on the
market for building light custom structures.
Moble :+86 13590428256